Home > Conveyor Products > Plastic Conveyor Belts > 880M Series

Regina Chain logo Tynic Automation
880M Tynic Automation
Regina Technical Datasheet

880M RG Series: Magnetic Sideflexing Chain

 

Magnetic

Reduced Plate Gap

Pitch: 1.5″ (38.1mm)

Thickness: 4mm (0.157″)

Hinge: 42mm (1.654″)

Contact Us For Price & Availability…

Material Width (mm) Width (inch) Plate Thickness (mm) Plate Thickness (inch) Working Load (N) Working Load (lbs) Weight (kg/m) Weight (lbs/ft)
UP Acetal (POM) 82.6 3.25 4.0 0.16 2000 450 0.98 0.66
UP Acetal (POM) 83.8 3.30 4.0 0.16 2000 450 0.99 0.67
UP Acetal (POM) 114.3 4.50 4.0 0.16 2000 450 1.12 0.75
Kevlar Reinforced Acetal (DK2) 82.6 3.25 4.0 0.16 2000 450 0.97 0.65
Kevlar Reinforced Acetal (DK2) 83.8 3.30 4.0 0.16 2000 450 0.98 0.66
Kevlar Reinforced Acetal (DK2) 114.3 4.50 4.0 0.16 2000 450 1.12 0.75
E-FAST 82.6 3.25 4.0 0.16 2000 450 0.97 0.65
E-FAST 83.8 3.30 4.0 0.16 2000 450 0.98 0.66
E-FAST 114.3 4.50 4.0 0.16 2000 450 1.12 0.75

Please Note: Part Numbers can be found within the Regina Technical Datasheet. 

Ultra-Performance Acetal (POM) Ultra-performance special acetal resin is particularly suitable for applications where low coefficient of friction and contained dusting are needed.
Special Kevlar Reinforced Acetal (POM) A next generation material, Acetal resin reinforced with kevlar was developed by REGINA. This material is able to reach the lowest coefficient of friction with maximum wear resistance. Thanks to the superior material qualities, the usage of lubricants can be drastically reduced or eliminated without losing performance in conveyor applications.
Ecological Friction Abating Plastic An ultimate dry running acetal resin, REGINA utilised its expertise in high performance resins. E-FAST material is capable of exceeding todays high standards of speed and productivity. This is due to its unique characteristics of significantly lower coefficient of friction and almost complete dry running conditions.
Abrasion Resistant Nylon (PA) Abrasion resistance nylon is primarily suitable for glass manufacturing applications. Excellent wear resistant and low dusting. Only usable in dry running applications.

p880MRG Drawing Tynic Automation

Sprockets For 880M RG Series Belt

820s sprocket Tynic Automation

Available: Moulded/Machined, Drive/Idle, Multiple Bore Sizes & Various Teeth Quantities.

See Regina Technical Datasheets.